AKTRONIX BT GPS Bedienungsanleitung PDF herunterladen (Seite 12)

• Wettkampf class

Waypoints

The waypoints are shown as a list or a single view. Each of them has a position

with altitude, a bitmap for the display, an alarm distance and an alarm function.

Alarm distance and function is set on the import and is predefined on the used

waypoint group. Same with the bitmap - if this it not announced in the import

file. E.g. a new waypoint is added. It gets the values from its waypoint group

To add a waypoint from bearing means the start is the current position and you

have to enter the distance (input depends on the selected speed mode - m, ft or

nm) and the angle to run.

Another option uses the current waypoint to create a new point via the bearing

and distance.

To add a waypoint from map needs a calibrated map. Please enter the

calibration view (see menu in map list). Select a point with the cursor, press the

enter key and select the waypoint entry.

Define a waypoint from main map:

First select a calibrated map from the map list. Press '*' until you have the map

centered and visible. Then in the waypoint menu a new entry is shown - 'Define

Waypoint'. This brings a red circle to the screen center. Move around to find

your waypoint. Than press the center of navigation button and select 'Position

as Waypoint' or 'Cancel'.

Set the current waypoint as new position - this only works in offline GPS mode.

A special waypoint mode is the anquer alarm. It defines a position and when

leaving an area of ~ 50 meter an alarm sounds.

Waypoint Groups

Waypoint groups are selections of waypoints to organize the system. Here are

placed the import and export routines for the waypoints. Please use only

geodetic coordinates (not UTM format) for import.

All waypoints in a group can get the definition of the group.

Special: Use of Areas

A group of way points can be used as an area. The border is made point by

point in its normal order. The last point is connected to the first point, so a final

point over the first one is not necessary. The area may defined as ToGo or

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 32 33

Keine Kommentare

AKTRONIX BT GPS Bedienungsanleitung Seite 12